Trend T35 M-Class Dust Extractor

Equally at home in the workshop or the jobsite, the new Trend T35A (Dust Class M) dust extractor offers ultimate performance and protection from fine dust generated by power tools, including MDF dust.

The T35 is dust class category M rated to EN60335-2-69, for dust with workplace limit values ≥ 0.1mg/m3. It is designed for professional use, the extractor offers industry-rated protection to home woodworkers as well as the trade and has a durable, impact resistant tank with a 27l dry pick up capacity and also has a 16l wet pickup facility.
The auto shaker facility keeps the HEPA 0.3 micron cartridge filter free of excessive dust build up and the extractor also has a blockage warning light to ensure maximum performance at all times.

An auto-start socket allows power tools to control the extractor with an eight second run on to clear any residual dust once the tool is switched off. A maximum of 2,200W can be plugged into the auto-start socket (1,000W on the 115V model).

Alongside the extraction capabilities the T35 also features an extra-long 7m power cable and a 5m 39mm diameter hose. It can also be used as a blower and comes supplied with a complete set of floor cleaning tools, crevice tool and round brush, making the T35 a top class all-rounder for micro fine dust, liquids and general clean up tasks.

The T35 M-Class Dust Extractor is available in two versions: the T35A is 230V and 1,400W and is priced at £418.80, and the 115V version is rated at 800W and priced at £454.80. Both are available from all Trend Routing Centres and Stockists across the UK.

To find out more, visit Trend’s website