Workshop & Tools

Please login to create a new thread

Please note, this topic is pre-moderated and postings will not appear until they have been approved.

Thread	Replies	Views	Latest Post
Removing rust from hand tools By Bill Wheeler	8	244	04/01/2019 20:39:03 by Cedric Wheeler
Belt Sander.. Branded or non branded one? By Farooq Arif	2	147	31/12/2018 16:30:03 by Ron Davis
NVR and foot switch By Keith Burns 1	0	154	03/12/2018 22:12:42 by Keith Burns 1
Making panel cauls. I made a set of these some ten years ago, from them I made 22 raised panel oak kitchen cupboard doors By derek willis 1	1	246	28/10/2018 14:43:22 by Derek Lane
Any recommendations on a good starter set of carving burrs for detailed work? By Jas Evic	4	256	21/10/2018 19:46:56 by Jas Evic
Cabinet project - uneven boards By Jas Evic	1	4691	18/10/2018 09:29:21 by derek willis 1
Cheapo Dovetail jigs By Wilf.T	1	391	26/09/2018 13:30:59 by derek willis 1
Orbit or Belt Sander Which One? Which is best and can anybody recommend a good value one By Tim Lawrence	54	10817	16/09/2018 10:40:24 by derek willis 1
Benchtop belt/disc sanders. Thoughts? By Nancy Brown 1	1	381	11/09/2018 16:27:15 by Derek Lane
MANUAL FOR SIP 01489 BANDSAW By Martin Grindell	15	1877	22/08/2018 19:51:00 by Ron Davis
Bandsaw DN 339 By otto brummerhoff	11	7893	07/07/2018 17:29:44 by ian anderson 3
Looking for a high quality hammer drill By Chan Tommy	4	914	05/06/2018 10:08:58 by derek willis 1
Adjusting planer blades Kity 439 By John Baddeley	3	507	25/05/2018 19:36:36 by Ron Davis
Machining timber question[s] Prepping oak boards By John Baddeley	6	483	22/05/2018 18:08:33 by Mike Jordan
Jointer/planer combo question Elektra beckum hc 260 By Nick Blears	1	691	02/05/2018 20:23:39 by Ron Davis
Lurem combination machine By Peter Farnell	9	16995	26/04/2018 13:58:18 by dan powers
Disk/belt sander safety rules By Nancy Brown 1	0	582	24/04/2018 06:17:34 by Nancy Brown 1
help router/table By Dauid Kent	52	6030	06/04/2018 14:48:20 by James Richardson 1
Planer thicknesser Advice on best buys By Jason Denby	3	1354	23/03/2018 03:22:03 by Chan Tommy
Some more of my tools now in my collection By David A. Moody	4	1462	07/03/2018 07:17:51 by Chan Tommy