1048 forum posts
I have to build some louvre doors and thought this might be a job for the Domino. I needed a slot cut on an angle though so after a bit of thought I came up with this home made jig.
Yes I know it's a bit Heath Robinson but it does work believe it or not as can be seen in this next shot.
I had to build two jigs of course one for the left and one for the right side. It did take a bit of tweaking to get it right but I am happy with the results.
To ensure it was accurate enough I joined the two together using just the Domino dowels to make sure.
That is the test done now to build those doors.
|Derek Lane||07/06/2013 22:08:37|
3215 forum posts
It matters not if a jig is "Heath Robinson" as long as it works which it does for you. And I am sure it will be up to you usual high standard.
Please login to post a reply.
Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!
We're always happy to hear from you, so feel free to get in touch!