Home made Router Table!

All Topics | Latest Posts

paul wagstaffe	04/09/2011 17:22:36
107 forum posts 11 photos	Has there been any threads on here about making a home made Router Table? I would like to make my own router table but could do with some tips. Regards Paul
Brian Barber	04/09/2011 21:09:52
160 forum posts 244 photos	Hi Paul Yes see my album on router table build also a thread on router table lift Brian
Brian Barber	04/09/2011 21:10:03
160 forum posts 244 photos	Hi Paul Yes see my album on router table build also a thread on router table lift Brian
BillW	04/09/2011 22:31:27
711 forum posts 21 photos	Nice router table Brian. There's loads on the internet Paul it's a case of finding one that suits you. Paul Jones 4 has recently posted a link to a table he is building. Bill.
paul wagstaffe	05/09/2011 07:54:34
107 forum posts 11 photos	Thanks guy's, I will get started on my Router Table today. Regards Paul
Big Al	05/09/2011 11:05:22
1602 forum posts 73 photos	I bought plans for the new yankee workshop deluxe router table which I can thoroughly recommend. Handytools.co.uk sell their plans. Al
Simon Reeves	05/09/2011 13:03:06
622 forum posts 227 photos	Mine is nowhere near as good as Brian's, but it works OK. The top is a 30mm white kitchen worktop from B&Q which you can just see stood upright on the left of the photo of my mobile workstation below. The laminated finish is nice and slippery and matches the infeed and outfeed sections. It has a phenolic insert for the router and a T-track slot for a mitre gauge/featherboard. The table replaces the base for my mitre saw, which just lifts out. The fence, which is stored in the base of the unit, is very similar to Brian's, but is fixed to the top rather than being clamped to it, and is adjustable for right angle. The fence also has a T-track slot for featherboards. The drawers on the left hold all the router cutters and associated tools etc. Also, you can see the NVR switch on the right, discussed in another thread. Simon
Derek Lane	06/09/2011 14:18:37
Moderator 3219 forum posts 1004 photos	I also built a router table imular to the new yankee style one I have too take some more photo's as it is complete now