Pauls table

dennis wake	29/03/2011 22:50:17
2044 forum posts 1451 photos 1 articles	hi Paul you are really coming on with your turning. only one point to make on the spindle make the coves a little deeper and this will give the table a little bit of depth like this one i did a few years a go other than that it is a really good table. what is it made of is it oak. and what have you finished it with. and a gen well done. dennis
fatboy	30/03/2011 00:24:40
169 forum posts 116 photos	nice table paul, its an unusual size did you design to fit a particular space in your house?
paul johnson 2	30/03/2011 17:59:40
197 forum posts 100 photos	Dennis thanks for starting a thread on the table you got a valid point on the depth of the coves something i will take onboard as always do with all the comments i recive from this forum and members, and yes you are right it is oak. Fatboy to be honest the hieght is what i wanted but the diameter 91/2'' is the biggest i can turn on my lathe.