By continuing to use this site, you agree to our use of cookies. Find out more

In this month's Good Woodworking

All Topics | Latest Posts

Search for:  in Thread Title in  
Dave Atkinson23/10/2008 12:46:00
avatar
672 forum posts
115 photos

Interesting thought that because you don't turn the mag isn't good value. I don't do many things that are written about the magazine (I'm primarily a truner) but I still believe it provides good value overall.

Dave

Andy King23/10/2008 12:58:00
avatar
170 forum posts
8 photos
19 articles

Hi Jim,

 the correct email Jon is: john.bentman@myhobbystore.com
Quite why there an 'H' in there is anyone's guess!

As for the turning, Good Woodworking has always had turning in it, although we don't seem to have the entry level stuff like we used to.
I think with magazines such as ours that are designed for woodworking in general rather than specialising on a specific area, there is likely to be a part where its not going to appeal to everyone.
Turning is a good example as it is often its own subject, and you can make plenty of things without going near any other woodworking, but there are others who may find it useful if  they want to incorporate turning within traditional cabinetry work for instance.

It's always going to be a tricky balance when there are numerous subjects to cover!

 cheers,

Andy

Jim Beach23/10/2008 15:50:00
37 forum posts

Hi Dave,

Thanks for your replies. I will try the new e-mail address.

I take both your points about catering for cabinet makers and turners but feel that they are different disiplines and I wonder how many people are serious about both. That is not to say that we can apreciate the skills of both.

You only have to attend one of the woodworking shows to see the amount of interest there is in turning and of course there are magazines that specificaly cater for this woodworking skill. There are also magazines that cater for funiture & cabinet making.

In these days when money is tight what sort of magazine will people go for? My thought is one that fully caters for their interest rather than one that is general, but thats just my personal feeling.

Thanks again for your replies

Regards

JIm

Ralph Harvey25/10/2008 00:19:00
3274 forum posts
315 photos
2 articles

Just managed to get my copy this month, and must admit i was/am plesently supprised by it, a very informative article on dovetails, as a joiner i have not needed to cut them too often and not sure when the last time was but i found the hand verse machine a good read this month,

The article "guarding the drop" has somewhat dropped me in the mire as my wife has taken a likeing to the style and would quite like it around the front of the house so thanks for that  

The article on Dave Roberts dispite my previouse comment was quite informative my only concern is that unlike other magazines where there is a mix of turners and turning styles is it Dave or his Turning that is becoming more important, He is an excelent turner and probably one of the top turners around today so this is not a dig at him, however maybe he could introduce some other turners and there work to expand this side of the magazine ? just a thought

By the way what is the meaning behind "The Real Dave Roberts"? oh and the Chess board on page 18 is fantastic a great idea.

Might sound daft but i had never thought of making my own Finger planes ?  i can see some ideas to help me in this article great idea and very well laid out easy to follow.

The new style write up on the Get Woodworking site is still running well thanks for that.

Well off to continue reading now.

Ralph

Richard Hawkins25/10/2008 08:29:00
avatar
78 forum posts
29 photos

I went to Smiths to get the latest edition as dovetails is something I am playing with at the moment. I am playing with the Incra fence, but didn't notice it mentioned so didn't buy the mag. (I should point out that we are really hard up at the mo so I stopped my subscription, nothing personal!)

On the idea of "turning" in Good woodworking, I think it is a good balance. I have noticed this divide in the wood working would between turners and the rest. I say that because we are not all furniture makers. Some make toys, boxes, models, puzzles and all sorts.

As my interest is in boxes I want to be able to use turning when I need to to acomplish what I want. Unlike a lot of turners, I don't go into my workshop for a couple of hours and emerge covered in wood shavings with an elaberate bowl or candle stick. Turning for me is "when I have to!" So, I don't want to go and buy a special turning mag, but to have the articles that are there is really helpful. Occassionally I remember a technique in a past edition and dig it out and it has been helpful.

 A while back Andy went under Dave's tuition, I remember there were complaints about the number of photos of Andy. But I thought it lightened the mag. Sometimes it can be a bit too high end and serious. I love those features on the top guys and gal (I have only seen one that I remember!) 

I think it is true that you can learn from a master, but what you don't see is the years of mistakes, what you see is the perfected technique. Watching novices can teach you by their mistakes. But then the trouble is it is down to what is edited, it is no good having novices if all their mistakes are edited out. Anyone can be made to look good in the media. Most bad habits are common to us all.

But that said, it has always been my favourite woodworking mag.

Richard

Toothy25/10/2008 21:12:00
avatar
458 forum posts
67 photos

Hi Guys

I like the comments about The Woodworker but at the moment I can't join in as my copy hasn't arrived

Ben

is there an e-mail at customer services that us overseas guys can use.

Toothy

Jim Beach26/10/2008 10:10:00
37 forum posts

Hi Toothy,

Sorry your mag hasn't arrived. I noticed that you are overseas, do you know of a way of finding out where contributers actualy live? It doen't appear to be in anyones profile and I think it would be quite usefull.

Jim

Toothy26/10/2008 15:19:00
avatar
458 forum posts
67 photos

Hi Jim

Unless the contributer puts it in his/her profile it appears not to be available. Ben may be able to confirm/expandon this.

I am in South Africa. I've noticed members in New Zealand, Canada Germany so far.

Toothy

Sparky26/10/2008 15:43:00
7631 forum posts
22 photos

Would be nice to allow people to see your profile instead of keeping it private, then Jim wont have that problem!

Marc  

Jim Beach26/10/2008 19:25:00
37 forum posts

Hi Toothy & Sparky

thanks for your replys, it would be nice to know where people are located, they may be on your doorstep.

Jim

Olly Parry-Jones26/10/2008 21:32:00
avatar
2776 forum posts
636 photos
That's an intriguing idea - a site map of forum members! (Ben, are you reading this?)
Mike Riley26/10/2008 21:37:00
337 forum posts
5 photos
5 articles
There's one o UKW though sadly neglected but it shows the way so to speak. Google maps API ftw. Cheers Mike
Toothy27/10/2008 13:52:00
avatar
458 forum posts
67 photos

Sparky

Click on the name (Toothy above) and you will see the persons profile  and don't forget to smile for me  

Ben

You may need a world map

Toothy

Woodworker27/10/2008 22:57:00
1745 forum posts
1 photos
74 articles
I think it's a great idea. Not sure how much work it would involve to integrate into GW but I'll look into it.
Jim Beach28/10/2008 10:21:00
37 forum posts

Hi Ben

Since my earlier comment I have revisited the site and noticed that the location of some of the contributers is available in their profile.

This was all I was looking for at the time but OPJ's idea looks good

Jim

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker inc Good Woodworking 

Latest Forum Posts
Support Our Partners
Triton
Wood Workers Workshop
Felder UK April 2016
Transwave 2017
Peter Sefton IMPROVE FAST LONG
Turners Tool Box
Tormek
D B Keighley
D&M Tools
Tool Post
Chippendale
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact