|Teka Aston||24/11/2016 14:15:50|
|1 forum posts|
Advice please on materials and method for sealing the cut ends of laminated chipboard worktop
|derek willis 1||25/11/2016 09:10:08|
99 forum posts
I presume this will be where a sink or such has been cut into
the worktop, waterproof P.V.A. adhesive is the easiest, otherwise
any bitumen based sealant, alternatively, silicone will be o/k.
Open ends will have a cover strip to be fitted, treat top to top same as a cutout
|Cedric Wheeler||30/11/2016 17:44:06|
|154 forum posts|
I use wet rot wood hardener for this job. It is thinner than PVA so will soak into the wood better. allow to dry between coats and continue until the chipboard wont soak up any more. I recently put new worktops in my kitchen and put six coats of hardener on.
|Kelvin Bardwell||28/12/2016 09:22:51|
1 forum posts
Well any thoughts or advice gratefully received form members.
Please login to post a reply.
Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!
We're always happy to hear from you, so feel free to get in touch!