Here is a list of all the postings robert dignam has made in our forums. Click on a thread name to jump to the thread.
Thread: Charlie Chaplin finished |
23/05/2016 13:04:25 |
Thread: Charlie Chaplin |
16/04/2016 09:03:56 |
|
Thread: delta scroll saw spares |
26/08/2015 12:26:52 |
I think I got more chance of finding lord lucan Derek not many delta spares about these days |
26/08/2015 11:58:02 |
I'm looking for some spares for my delta scroll saw 40-540 the part was also used some other models if anyone has one or knows where I can get one please contact me thanks in advance |
Thread: bb king Debbie Harry |
24/06/2015 15:40:33 |
thanks Steven and Derek the Debbie Harry is 12x12 inches and bb king is 14x12 inches and the backing is, just black card thanks Edited By robert dignam on 24/06/2015 15:41:30 |
23/06/2015 09:25:02 |
cut these recently bb king and Debbie Harry cut from 4mm birch plywood thanks for looking |
23/06/2015 09:22:53 |
Thread: a couple more portraits |
27/12/2014 22:41:43 |
Thread: A selection of Scrolled portraits |
18/10/2014 16:35:31 |
Some very nice cuttings dave what software do you use to make your patterns |
Thread: The stones |
17/10/2014 20:29:39 |
Posted by daveO on 17/10/2014 18:37:27:
Robert nice cut on that one just a question were are you getting No1 Niqua from, assuming you are not talking about the yellow niqua, I cannot find any smaller than a 5, not in the UK any way. Oh and bet that 540 you are using is a mere kitten compared to the Q3 ?? Didn't you get that motor rewound??
Ron the UK publishers no longer seem to have any interest in scrolling anymore, guess its because theres not much call for it, but as I and Robert know there is a big following, will show a couple of my recent cuts Dave Dave sorry they wasn't reverse tooth niqua no 1s they was niqua no 1standard blades I got from hobbies through eBay I started off using Flying Dutchman reverse no1s but ran out so I finished it with niqua no 1 standard blades I haven't fixed the q3 yet still looking for a motor which are very hard to find the 540 is a good little saw and I think is better for fine fret work as it's a less aggressive cut than the q3 was but I do prefer the q3 looking forward to seeing some or your work cheers. Bob |
17/10/2014 20:07:22 |
Posted by Malcolm Alexander 1 on 17/10/2014 17:51:18:
Robert, what size is it and where can I get the pattern from please. Malcolm it was a4 size but I blew it up to a3 at the libary I got the pattern from scrollsaw village the pattern maker was called the ozz if you have trouble finding it let me know |
16/10/2014 22:45:45 |
Thanks for the kind comments ron and Malcolm it took me approx 8 hours on and off I used a no1 niqua reverse tooth blade. |
Thread: Elvis |
06/10/2014 20:25:29 |
Thanks Malcolm my wife and sister in law went to Graceland a couple of years ago they loved it |
Thread: The stones |
30/08/2014 16:05:15 |
Thank you simon |
27/08/2014 08:47:41 |
Thanks Derek I managed to buy another delta scrollsaw not has good as my old one but still a good saw I don't think you can beat the old delta,s |
26/08/2014 09:09:19 |
|
Thread: Elvis |
08/08/2014 08:53:16 |
Thank you derek |
05/08/2014 08:19:20 |
Thanks Simon |
03/08/2014 13:17:13 |
|
Thread: Scrollsaw portraits |
14/07/2014 13:25:43 |
Thanks Derek they are not my patterns they are from my friend on another forum |
Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!
We're always happy to hear from you, so feel free to get in touch!