By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Joe O 3

Here is a list of all the postings Joe O 3 has made in our forums. Click on a thread name to jump to the thread.

Thread: Magazine issue (dec)
18/12/2008 23:54:00
Hi David, Welcome to the forum. If you go to the Gallery you will see where Ben has posted detailed instructions on how to upload photoes to the Gallery, Hope this helps, JOPe.
Thread: Open Twist Goblet 2
18/12/2008 20:22:00
PS, Alan, If you go to the Gallery section of this forum Ben has posted instructions on how to go about uploading photos to the Gallery/Forum. Again i hope this is of help, Joe
18/12/2008 20:13:00
Hi Alan, Try the link again. look up in the top left corner and you will see 2 flags, 1 Itialian and next to it a British flag. Click on it.(when the pointer becomes hand shaped clic on it) Hope that helps, Joe.
Thread: warren
15/12/2008 21:55:00
Warren, Same to you and yours and all the best for 09' Joe.
Thread: Softwood TV cabinet
15/12/2008 21:51:00
Hi Mailee, Well made. keep up the good work! Joe.
Thread: Double glazed sash windows
15/12/2008 19:29:00
HI Andy, Welcome to the forum, Someone with more technical knowledge than me will be able to guide you seamlessly to Andy Bell's blog on the subject. "slidingsash.blogspot.com" Joe.
Thread: Computer Desk Design
08/12/2008 23:40:00
Ben Looks like you got the makings of a new gallery feature to go along with 'Show us your bench'. 'Show us your Computer Desk. After all it is the next link in the chain between bench and the wider membership. Joe.
Thread: Gallery Competition
30/11/2008 16:17:00
Congratulations Marc, Thoroughly well deserved. Enjoy your prize, you earned it. Joe.
Thread: Lidl Vaccum Container.jpg
27/11/2008 21:33:00
Hi Dave and Anton, Probably inded as an example of reasonably priced, widely available potential electrical hand tool dust extractor. Joe.
Thread: Egyptian style dresser 2
26/11/2008 18:30:00
Marc, "A thing of beauty is a joy to behold" Well wortt every minute spent on it. Congratulations! Joe
Thread: Pic 36
21/11/2008 21:20:00
Hi Guys, Top of table to ground would normally be about 30" (760mm). IT would depend on the chairs being used. Average heights would be 17to 18" 430 460mm high. Allow about 9- 10"to the bottom of the apron underneath. Bottom of apron to ground about 26" 660mm. Hope this helps Joe.
Thread: Poppy Pedal Car & Dewlin Car
27/10/2008 19:35:00
Hi Dave and John, Welcome to the forum. As you will see i am not long a member myself. I would recomend you fill in your profiles. it lets other members know a little about who they are comunicating ( not compulsary but helpfull) while doing that you can clic the message me option. You see on the bottom of some members posts beside the ignore member and send to a friend. Message me allows you to send messages directly to another member without it appearing on the forum.If you get one you will be notified by notice on the inbox when you click on the site and the inbox of your e-mail provider. Hope this helps, Joe.
Thread: Bureau-Ash.jpg
19/10/2008 19:47:00
Hi Mike, Alovely piece. Is this the start of a "Flintstone Collection" of household furniture?
Thread: Magic gripper,(my version) 1974
13/10/2008 17:36:00
Usefull to have around the workshop and easy to replace should they disapear. Thanks for that Robbie! Joe
13/10/2008 15:38:00
For the benifit of newer members like my self (begging Mikes patients a little longer), could someone explain what these magic grippers (Dereks or others) are or look like as the photo in Dereks gallery are not there. Again begging members patients. Joe
Thread: Why didn't I think of this before!!!
06/10/2008 22:12:00
Mark, Anything that makes working in such unpleasent environments that bit more comfortable and healthy needs no appology. Thants fora good yet simple idea. Joe.
Thread: Kick out the plastic
06/10/2008 21:38:00
Andy, Gavin beat me to it. Congratulations on a great blog and i am looking fordward to future instalments. Keep up the good work. Joe.
Thread: horse box.jpg
24/09/2008 23:59:00

Well done Warren,

A nice balance of design and craftsmanship.

Keep up the good work.

Joe.

Thread: planer jig 2.jpg
15/09/2008 19:16:00

Hi Sparky,

Just found  the pic,s of your workshop (new member) very impressed with your planer and router table.

Thread: New site platform for GW...
01/01/2009 03:49:00
Good morning Mark, BELATED HAPPH NEW YEAR ! to you and yours, and all at the sitr! Yours in gratude, Joe O'Brien.
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Support Our Partners
Marriott & Co
Robert Sorby
Transwave 2017
Wood Workers Workshop
Triton
Peter Sefton IMPROVE FAST LONG
Craft Supplies
Felder UK April 2016
D&M Tools
Turners Tool Box
Chippendale
D B Keighley
Tormek
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact