By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Joe O 3

Here is a list of all the postings Joe O 3 has made in our forums. Click on a thread name to jump to the thread.

Thread: My Friends
28/07/2011 23:44:34
I think it is a pity that those who put it there didn't see fit to post details of what it is for and how they intend it to be used.
Thread: sash windows
22/07/2011 01:14:07
Hi John,
Welcome to the site. Idon't know about plans or downloads but here goes.If you look at the Mumford & Wood website (i have absolutely no connection to the company)
there is a page called "2004 Conservation Box Sash" which shows 2 cut away sections anatomy of a sash window. Alternatively there is a good blog by Andy Bell (sometime member of this site) entitled "DIY Sliding Sash Window" on http// Sorry i do not have a link to either.
Hope this is of some help.

Edited By Joe O 3 on 22/07/2011 01:17:31

Thread: How to download the videos
06/07/2011 23:38:09
Hi Nicholas,
Welcome to the forum.
I would think that for copyright reasons you would not be able to download thease videos.
Thread: tv problem
29/05/2011 20:22:22
When i clicked on it yesterday it started to play part 6.
It got to view it by clicking on part 7 in "Latest Articles" below it.
Thread: Easter Greetings
23/04/2011 23:14:03
I would like to take this opportunity to wish a very happy Easter to all those involved in bringing us Good Woodworking, The Woodworker magazines and the staff and members this fine site.
Thread: Fuseboard cabinet
02/03/2011 15:25:56
I agree with all the above comment.
Well done
Thread: kens coffee table
22/02/2011 21:37:03
I totally agree with all the above comments above.
Well done
Thread: wooden bandsaw
20/02/2011 19:19:09
Is this what you were refering to
Thread: Dodgy link
25/01/2011 15:34:37
Yes Marc,
Working for me anyway
Thread: Magazine subscription
23/01/2011 20:10:49
Welcome to the forum Per.
You have not as yet filled in your profile so i do not know what part of the world you are in.
If you had a tape measure from the British isles you would not have a problem because our tape measures have imperial measurements along the top and millimeters along the bottom so you can see what a particular demention in inches equals in mm underneath.
Imperial measurements are now  mostly only used in American publications.
As to magazine preference, I like both.

Edited By Joe O 3 on 23/01/2011 20:14:23

Thread: Dodgy link
21/01/2011 17:18:31
Hi Marc,
I have the same problem. When you click on the cover or the link beside theDec/Feb issue of Practical Woodworking, (the 3rd cover, below  The Woodworker and GoodWoodworking) you get told that you," are not an administrator"

Edited By Joe O 3 on 21/01/2011 17:21:25

Thread: Bi fold doors
11/01/2011 01:12:09
I agree with Derek. Quality work as usual.
Thread: Tabletop Lectern
09/12/2010 22:50:17
Welcome to the forum.
I would like to congratulate you on a fine piece of woodwork.
I like it very much and look forward to seeing more of your work
and i hope that you will stay with this forum and allow us to benefit from
(if this fine piece is anything to go by) your considerable expertise.
Thread: cant open the box
24/11/2010 23:24:59
Hi Tommy,
Apart from suggesting that you use the  smaller viewing screen
i haven't any other ideas.
Thread: Sycamore jewellery box
26/10/2010 15:04:18
Beautiful box Ian.
I think the yellow velvet suits the light colour of the box
rather than the usual green.
Thread: Hand tool Fanatic
04/10/2010 14:57:00
A treasure trove of usefull information
and all in one place.
Well done  Derek.
Thread: Finishing pine staircase and spindles to prevent yellowing
23/09/2010 23:42:58
Hi Debbie,
Welcome to the forum. Colour/stain i would leave to your personal choice.
(you have to live with it). Polyurethane be it gloss, mat or vinyl will yellow with age and sunlight. Clear acrylic is not supposed to go yellow and brushes or rollers can be washed in water. will work on floors and therefore stair threads.
Hope this is of some use.
Thread: spindle threads
21/09/2010 21:20:49
Hi Marc and Dennis,
I had that problem yesterday evening but it is cured today
Thread: Grain tear
17/08/2010 20:00:37
Beautiful piece of furniture!
Well done David
Thread: expensive tools
27/07/2010 14:37:50
Hi Adrian,
Firstly welcome to the forum. The tools you need will depend on the particular branch (pardon the pun) of woodworking you intend to follow. While i would agree with most of what Brian wrote, you could go for mid priced tools, build up skill and confidence and then graduate up. AVIID CHEAP TOOLS like the plague.  Who ever coined the phrase " A bad workman blames his tools" didn't work in wood. It is easy to do a bad job with good or bad tools it is ALMOST impossible to do quality work with  inferior/bad tools.
The members here will i am sure be only too willing to offer help and advice when asked.
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Support Our Partners
Robert Sorby
Transwave 2017
Felder UK April 2016
Marriott & Co
Wood Workers Workshop
Craft Supplies
D B Keighley
Turners Tool Box
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact