By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for paul wagstaffe

Here is a list of all the postings paul wagstaffe has made in our forums. Click on a thread name to jump to the thread.

Thread: The shelves are empty!
11/12/2011 20:02:45
I think its wonderful watching the sea when its like this, there was some crazy guy out surfing this afternoon.
 
Paul
11/12/2011 12:47:01
No boats have run now for a week or so and the Isle of Man is running out of just about everything, the winds are now at gale force 10 and the sea is just white with breakers, I can see the sea out of my window and I don't think any boats are going out today. some times living on a island 18 x 33 mile's sucks!
 
Paul
Thread: Gripping Matt
11/12/2011 12:39:56
Thank you for your kind replies I think I have found what I am after on eblag!
 
Regards
Paul in a very windy Isle of Man
 

10/12/2011 09:30:11
Well that's what i think its called. I am looking for some of the Matt that is used to put down on the bench to stop the wood moving about when routing, don't no what its call or where to get hold of it. can you help?
 
Regards
Paul in the Isle of Man
Thread: Setting a planer???
26/11/2011 05:32:04
Hi Drew, as Bill has directed you to my post I had a variety of similar problems with my machine and setting the blades to the same height as the out feed table solved just about all of them.
One other thing to check is make sure your blades are nice and sharp.
 
Regards
Paul
Thread: New Moderator
22/11/2011 16:38:45
Posted by BillW on 22/11/2011 13:36:29:
Hello and welcome Danny.
 
How about telling us all a little bit about yourself.
 
Bill.
 
 
Yes spill the beans, who is Danny?
 
Paul W
 
 
Thread: Andrew's Bench
21/11/2011 22:10:41
What a perfect bench that is, will last you many years. Well done!
 
Paul Wagstaffe
Thread: Cynthia's Bithday
20/11/2011 16:00:08
How do you guy's make such beautiful objects, I have more chance of stopping dog's peeing up tree's than making anything like that. Never mind, back to my door wedges and chopping blocks.
 
Paul Wagstaffe
Thread: Got There At Last
16/11/2011 18:41:00
WOW!
 
Makes me realise how far off the mark I am, as far as my wood work creations go.
 
Maybe one day!
 
Paul
Thread: Welcome to my Workshop!
16/11/2011 18:37:00
Posted by daveO on 16/11/2011 16:42:01:
paul
the tee slot the bit that the mitre fence rides in
cheers dave
 
 
Hi Dave, it's not the best fit but its not 1/ 1.5mm over size. In my head the table saw is not going to be the most accurate and precise machine in the world so I think its good for what i use it for, If you are not happy with the fit in the T Slot replace it with a better fitting piece of hard or ply wood.
 
Paul
16/11/2011 11:37:11
Hi Steve, know exactly what you mean by understanding wife as mine is very good about my addiction to any new tools I need, but as I say to her I don't go down the Pub and I don't smoke so I have to have some kind of escape from it all and in my case that's my workshop, I worked with a bloke years ago that played darts and Pool for his local pub and he went out ever night after work for 5 pints before his tea, god rest his sole he is not with us anymore. Anyway back to the garage i go.
 
Regards
Paul

Edited By paul wagstaffe on 16/11/2011 11:38:22

15/11/2011 22:31:41
Posted by daveO on 15/11/2011 16:40:36:
hi paul
if i'm not mistaken one of those table saws is a ryobi?
if so is your tee slot the right width/ just curious as in have on e but i think a diferent model mine has the sliding carriage. the slot is about 1-1.5mm two wide to my annoyance when it would have been just as easy to cast it the right size.
as far as the router contest is concerned i only have two, gar there .
cheers dave
Hi Dave
 
Not sure what you mean by Tee Slot? sorry to be a fool but can you explain.
 
Regards
Paul
15/11/2011 07:56:50
We need photographic proof Big Al.
 
Paul
15/11/2011 00:12:39
Posted by Mailee on 14/11/2011 23:34:57:
Posted by paul wagstaffe on 14/11/2011 23:30:32:
He who dies with the most tool's wins.
 
Paul
What about routers? I have nine.
 
I Have 4, "Ebay here I come"

14/11/2011 23:30:32
He who dies with the most tool's wins.
 
Paul
14/11/2011 20:10:11
This is just for fun, I think I have the most untidy work shop on this forum unless you can beat me.
 
Welcome to "Paul's Place"
 














Thread: 5 MONTHS LATER
05/11/2011 12:09:12
You will get there Steve!
 
Paul.
Thread: Disc sanding plate
03/11/2011 17:53:43
Thank for your ideas, I ended up making a disc out of ply and turning it true after I attached it to the pulley wheel that I also turned down, I even used the pillar and the drill bed from the drill that tilts to any angle i require. Its cheep and cheerful but dose the job just fine.
 
Paul

26/10/2011 15:21:35
Can you help? I am making a bench mounted disc sander out of an old motor from a pillar drill, I am trying to find a aluminum plate to mount on the shaft, anyone know were i can get hold of such a thing or do you have one I could purchase from you/
 
Regards
Paul
Thread: I think this is a good idea!
25/10/2011 14:22:05
You have probably seen this before but for me, I think its a great idea.
 
Copy and paste the link
 
http://www.woodsmithtips.com/2011/09/22/foolproof-miter-clamp/?autostart=true&utm_source=WoodsmithTips&utm_medium=email&utm_campaign=5156
 
Paul
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Latest Forum Posts
Support Our Partners
Felder UK April 2016
Robert Sorby
Transwave 2017
Wood Workers Workshop
Peter Sefton IMPROVE FAST LONG
Triton
Craft Supplies
Chippendale
Turners Tool Box
D B Keighley
Tormek
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact