By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for paul wagstaffe

Here is a list of all the postings paul wagstaffe has made in our forums. Click on a thread name to jump to the thread.

Thread: sticky label
18/04/2012 20:51:22

Silly as it maybe but I put Sticky Stuff Remover into eBay and bought a bottle of just that, it's great stuff and has worked on everything from tar on my car to label residue.

Paul

Thread: Looking for a chuck!
05/03/2012 18:41:27

Hi Dennis, I have won a Record Woodturning Chuck with indexing and a set of 50mm jaws and I paid £87.77p

Paul

Thread: Built myself a workbench...
05/03/2012 15:10:09

Just the job that bench, you will properly use it for years to come. Well done and a great use of recyclable materials.

Paul

Thread: New to turning
04/03/2012 21:24:30

You and me both Andy, I am just starting out on this new chapter of my wood working hobby.

Good Luck!

Pau

Thread: Looking for a chuck!
04/03/2012 21:04:57

Just won this,what do you think guy's

http://www.ebay.co.uk/itm/300670791861?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648#ht_500wt_922

Paul

03/03/2012 19:40:29

Thank you Dennis and Derek, I am very new to wood turning so I am a bit unsure what I need regarding a chuck for my lathe, I take it you think I would be better with a four jaw than 3 jaw? Is this what most wood turners on here would use? Thanks

Paul
03/03/2012 17:29:21

I am looking for a 3 jaw chuck for my wood turning lathe, the lathe is a Sealey sm1308 with a 3/4"x16 tpi thread. Any advice.

Regards Paul

Thread: Great find!
02/03/2012 16:22:58

After giving a kindly old gent a hand clearing some junk out of his garage I happen to comment on a wood turning lathe that was sat in the corner, it's a sealey sm1308 I told him, To my surprise he told me To take it away because it did not work, well that's like a red rag to a bull to a chap like myself. After a full strip down I discovered the grub screw on the upper pulley had backed off and the pulley was fowling on the body making a terrible noise. It's all fixed now and running like a new one. Thank you lady luck!
Paul
Thread: T Track & T Nuts for router tables and Jigs.
12/01/2012 22:42:04
Cheers guy's
11/01/2012 18:11:33
Dose anyone know where you can get T Tracks and T Nuts in the Uk?

Cheers
Paul
Thread: Metal Detector
10/01/2012 19:32:05
BOOOOOOOOOOOOOOOOOO out of stock!
 
Paul
09/01/2012 23:04:26
Cheers fella, for that price I will order one tomorrow.
 
Paul
09/01/2012 21:14:54
Hi mailee, Can you get the Little Wizard detector online? I can't get them over here.

Paul

09/01/2012 20:45:58
Hi guys, I am interested in buying a hand held metal detector for checking for bit of nails and staples that may be hidden in the wood before I put it though my thickness plainer, I normally just look for them but have missed them a few times and it has cost me a set of blades.
What type of metal detector would recommend?
Cheers Paul
Thread: Small oak kitchen table
04/01/2012 23:21:15
Seeing this kind of work makes me want to carry on learning woodworking. Thanks for showing me how it's should be done.

Paul
Thread: Lets talk Workshop heating!
16/12/2011 16:55:25
I am thinking of a wood burner so I can use my scraps as fuel.
 
Paul
16/12/2011 09:23:02
What have you got and how do you rate it, I have nothing at the moment and its bloody cold in there.
 
Paul
Thread: Gripping Matt
16/12/2011 09:20:28
Hi Steve,
"Transit Van with wing" is a fair description of the air craft over here.
 
Paul
Thread: The shelves are empty!
12/12/2011 16:18:33
Hi Paul, I am in Onchan just off the main road.
 
Paul
12/12/2011 10:04:16
North end of Douglas promenade opposite the Terminus Tavern. Are you on the Island Paul?
 
Paul
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Latest Forum Posts
Support Our Partners
Felder UK April 2016
Robert Sorby
Transwave 2017
Wood Workers Workshop
Peter Sefton IMPROVE FAST LONG
Triton
Craft Supplies
Chippendale
Turners Tool Box
D B Keighley
Tormek
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact