By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for paul wagstaffe

Here is a list of all the postings paul wagstaffe has made in our forums. Click on a thread name to jump to the thread.

Thread: Dewalt Radial Arm Saw
28/07/2014 22:58:53

Hi, I would like your views on a Radial Arm Saw, I bought one a few years back and I don't seem to be using it. My question is: is it me not thinking of uses for it or are they an obsolete tool in the work shop?


Thread: My Pallet wood project
28/07/2014 22:48:06

Yes totally pallet wood project, all you need is a plainer thickness machine. I am a coffee roasted so I get lots of hard wood and soft wood pallets.

22/07/2014 18:55:39

image.jpgIt's been a while from my last posting, here is my latest free wood project. Hope you like it. Regards Paul

Thread: My new toy for Christmas!
28/12/2012 23:41:55

Only bought it too tow my boat but I might have a go at a few green lane's.

27/12/2012 22:12:46

Can't wait for the snow!


Edited By paul wagstaffe on 27/12/2012 22:13:55

Thread: cotbed plans
25/12/2012 21:05:40

Try here also!
Thread: My mid life crisis!
30/11/2012 09:41:53

Well done Mailee, get your self over here for the Isle of Man TT and give your new toy a blast around the coarse.


Thread: Chaise Longue
20/10/2012 20:54:15

I saw an episode of "The Salvager" Rico made a chaise longue out of an old car, just an out of the box idea!

Regards Paul

Thread: greenhouse
24/07/2012 22:21:01

Have found this for you Sam!

regards Paul

Edited By paul wagstaffe on 24/07/2012 22:24:06

Thread: Riving knife for a table saw.
02/07/2012 17:25:53

Hi Dave, can you get the Micro splitter system in th UK?

cheers Paul

Edited By paul wagstaffe on 02/07/2012 17:26:38

17/06/2012 11:19:51

Hi guys, once again I need some advice, my table saw came to me second hand and the riving knife to prevent kick back is missing, has anyone on here thought of a way of making a riving knife or splitter for the back of the blade?
Thread: Wood glue
10/06/2012 19:02:30

Thank you guy's, as allways dependable and helpful advice. I think I will go with the Norm Abram advise but of course the is an argument for saying "Just get the joint right in the first place"


Paul, Dodging motorbike's as it's TT week here!

10/06/2012 12:29:04

Hi, I'm looking for a wood glue that will swell up after it is applied to help fill an imperfections in the joint. I am sure I have seen something like this before, can you help?

Thread: Dado
26/05/2012 18:08:22

Thank you Al, seems a shame but I am not going to argue with the powers that know far more than me especially when I can do the same job's on my router table.

26/05/2012 10:25:37

When I take a look at general woodwork projects on the Internet and You Tube, the woodworking people of the US seem to use a Dado blade in a table saw. Is the style of cutting a rebate used in the UK, and are they safe?

Regards Paul in the Isle of Man

Thread: The next generation...
17/05/2012 23:07:49

Very nice to see the young folk taking an intrest in producing somthing to be proud of insted of sitting in front of a xbox, well done little miss.


Thread: club comptition
09/05/2012 16:07:18

Typical just when I think I am getting good at woodwork, then I see something that brings me back down to earth, I still have lots to learn. It's my dream to produce such craftsmanship. Well done Sam that's fantastic.

Paul (getting ready for the TT in the isle of Man)

Thread: Dewalt Dovetail Jig
01/05/2012 20:48:06

Hi, I have just bought my first dove tail jig (thank you Dennis) it's a Dewalt and I am very happy with it, but I have to admit I am finding the instructions confusing. Can anybody recommend a thread or website for advice.

Regards Paul

Thread: kity k5 bestcombi
30/04/2012 13:51:27

I have to agree with the above, start at the plug and work back with a meter, it don't sound like a burnt out motor because it would smoke and smell bad! Good luck and let us know how you get on!


Thread: Draper Bobbin Sanding Drum
28/04/2012 10:03:17

I dont mean to offend but I think they are a bit of a waste of money (maybe that's because I am tight lol) I cut five disc's out of 18mm mdf, glued them together and drilled a hole down the centre, put them on some threaded bar. Then I turned them true, then I used contact adhesive to glue on some sand paper to it (make sure you cut the sand paper diagonally) Used in a drill press you have a bobbin sander. Simple's
Regards Paul
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Support Our Partners
Craft Supplies
Felder UK April 2016
Marriott & Co
Transwave 2017
Wood Workers Workshop
Robert Sorby
Turners Tool Box
D B Keighley
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact