By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Dauid Kent

Here is a list of all the postings Dauid Kent has made in our forums. Click on a thread name to jump to the thread.

Thread: RAGE 185mm Multipurpose Circular Saw
15/09/2008 21:44:00
hi opj  yes it is 100m with three blast gates and the extractor is records but when using the   planer thicknesser it wont suck it up the pipe ,as for extractor its rsde1 with 100m outlet its like bingo balls
15/09/2008 19:08:00
hi iue just put a dust exytract kit in for all my machinery but the record extractor carnt suck the chipping up the pipe can any one help       dauid
Thread: 6"x10" segmented vase
08/09/2008 19:05:00
HI DENNIS WHAT angle did you cut them at as iam very interest in makeing one
Thread: Fragmented bowl
08/09/2008 18:59:00
Hi, Baz could you tell me what angle you cut your segments at. Thanks Dave
Thread: record router table
05/09/2008 21:14:00
hi baz haue a look on record site
05/09/2008 16:10:00
         hi does anyone know how to make the record router table mobile so i can move it around the workshop thanks 
Thread: RAGE 185mm Multipurpose Circular Saw
05/09/2008 16:04:00
hi i have just bought a record power router table and does any 1 know any plans so i can make it mobile as its just a bit heavy thanks  regarding the ash boards i live in cheshire and the nearest place is buxton
17/08/2008 21:07:00
hi  were is the best place to bye ash boards from
Thread: Good Woodworking No 210
10/01/2009 18:32:00
Hi Ben, I understand that you have to have a certain amount of advertising to support the publication of the magazines and you have to appeal to a wide audience,but I think sometimes it forgets about the title of the magazine and the most important feature WOOD. I would like to see more articles about different species of wood especially aimed for woodturners and also more specialized articles e.g segmenting e.t.c. No matter if your preference is woodturning or furniture making the essential ingredient is WOOD. I hope this helps and you would make me a happy chap if you could oblige and leave the tools alone for a bit. Dave.
10/01/2009 13:43:00
theirs only so many tools you need but mag hit you all the time with tools and its the same company all the time recordpower what about the samll companys .if you look in the wood turning its all about turning not tools see my point i hope ben mybe its me  dave
09/01/2009 19:16:00
hi i got mine and their nothing in it what a waste of paper its full of advertisenent again what happend to woodworking like it says on the mag goodwood working  not good advertisenent mag ???????????????????????????????????????????????????? dave
Thread: acrylic
05/01/2009 18:48:00
hi all where can i get some coloured acrylic from iam going to add it some woodturning project if i can get some sheets of acrylic ?    dave
Thread: REPLACEMENT RIP FENCE
05/01/2009 14:13:00
hi all just phoned recordpower they have not gone bust ged so you can still get your parts from them ok dave
Thread: sourcing sycamore
03/01/2009 19:57:00
try ockenden at www.ockendenstimber.co.uk       ok
Thread: Record Power Lathes
03/01/2009 11:32:00
baz  do i keep  mine are buy nova help dave
Thread: REPLACEMENT RIP FENCE
02/01/2009 11:45:00

opj you need to carefull what you say about recordpower about going bust ? ill ring them on monday to find out let you known  dave

Thread: Record Power Lathes
31/12/2008 20:12:00
hi Georg and baz  the lathe iam looking at is the variable speed dvr-xp if i can get 400 pound for mine with a new nova chuck  becaues record lathe comes with the chuck . so happy new year to  you both dave
30/12/2008 21:42:00
hi Ralph   yes its got solid bars just fancey the new record nova if i can sell mine dave
30/12/2008 19:57:00
hi sparky i was thinking about up grading to a nova lathe ,have you got one ?
30/12/2008 13:15:00
hi, I have the Record  CL4 variable speed lathe and I am thinking of buying the Super Nova lathe I wonder if anybody has any views on this i.e pros &cons, as I would be interested in your comments. ? do i keep or buy new one? Dave
Magazine Locator

Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker inc Good Woodworking 

Latest Forum Posts
Support Our Partners
Wood Workers Workshop
Triton
Felder UK April 2016
Peter Sefton IMPROVE FAST LONG
Transwave 2017
D&M Tools
Chippendale
D B Keighley
Tool Post
Turners Tool Box
Tormek
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact