Here is a list of all the postings Paul Jones 4 has made in our forums. Click on a thread name to jump to the thread.
|Thread: DIGITAL ISSUES|
Both are available in digital format
|Thread: Outdoor Table|
JUst thought I'd show you the table I made to go with the bench
Just need some nice weather now )
The program is AutoCad 14.
A freebie you could try if you didn't already know about it is this one, progeCad 2009:
I may be changing the design now.
May go with just the two legs as shown, secured with dowels and bolt into the skirt, braced to the top.
The skirt will be glued and doweled at the corners with the inner top allowed to float on the plywood joints.
I have some treated softwood left over, just enough to make a small table.
The design I was thinking of doing is like this
The table top would be glued together and have bread boards on the ends.
The wood is 170x45 and 95x45.
If I built it this way what is the best way to attach the 50sq legs.
Or would I be better leaving say a 3mm gap either side of the central 95x45 member, leaving it to float on the plywood joint, and fixing the legs as shown with a diagonal piece screwed to the outer skirting.
|Thread: CYCLONE FAILURE!!!|
How about trying to convert what you have to something like this.
If it does fail, it will fail at the weakest part, that being the plastic cup construction.
The Sip bandsaw had a good review in July's The Woodworker.
For around £200 I guess all the bandsaws on the market will be about the same quality, but the Sip model has the larger cut height and a 2 year warranty.
Decided to wait till after Christmas now, so hopefully might get a few pounds knocked off.
I'm going to purchase a bandsaw. The one I'm thinking of buying is the new Sip model
which has a 150mm cut height, not bad I guess for £200.
Does anyone know if machinery suppliers generally have New Years sales after Xmas like your normal shops do?
I'd like the bandsaw now, but if I can save some money by waiting then I'll wait
|Thread: The shelves are empty!|
No not now.
Was over earlier in the year for the TT racing. Stayed with some friends at Onchan who live just up the hill you can see at the back of the 'Electric Railway'.
Then visited the Island again for our friends 50th birthday in November.
That picture I took in Oct' 2008, it blew a bit of a gale then too.
Where abouts on the Island do you live?
Recognise this place
But you have kippers and the TT
Was over on the island in Nov for a friends 50th.
They've just sent some over, LOVELY.
|Thread: Bit of a change for me|
Dont take offence, but
I think Kieth is spelt Keith.
Hoping I've got it completely wrong so you dont have to make another one.
|Thread: November Woodworking Mag|
Still no digital Woodworking mag.
The December one will be out before I get to read it.
Still no digital version of Novembers The Woodworker today.
Put some new hamsters in the wheel
|Thread: english bulldog|
That's really nice Robert.
How big is it?
|Thread: November Woodworking Mag|
The November Woodworking Mag has been shown on the Home page for some time now.
Has anyone read the online version yet. I keep trying but it doesn't show up.
|Thread: Sewing table - wall mounted drop down|
How about something along the lines of a wallpaper pasting table
|Thread: Letter Box|
Does the water enter through the opening as shown in my picture.
Try cutting a gully as shown so that the water will fall before running down the wall of the box.
|Thread: Faulty Link|
In the Woodturning forum theres a topic called "The wife asked me to turn something nice for her sister"
The last post should be by Mark Sutton, but I only get what seems to be half a page and the last post showing by Les Hetherington,
Anyone else get the same
|Thread: Sheet material cutting aid|
Well done Kev.
I searched for ages using things like, sheet clamp, panel clamp, plywood sheet clamp, etc, never thought of 'Sawing Clamp'...lol
Found a couple
Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!
We're always happy to hear from you, so feel free to get in touch!