By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for jay 1

Here is a list of all the postings jay 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: workshop
29/09/2009 20:57:16
wno but we sell there tools and we supple 3 phase and single phase motors already thinking about putting a three horse power motor in my new fox spindle moulder that will be interesting
29/09/2009 20:18:51
have not had the time started new job wood you beleave its in a tooling place that that supplies nearly every tool shop in ireland happy days
29/09/2009 19:59:25

does this ever happen to anybody else every few weeks you have to clean out the workshop and theres never any time to do gets to a point when you know you have to do something so you pay you kids to do it

Edited By sparky on 30/09/2009 16:45:37

Thread: sound proofing
28/09/2009 20:13:33
i want to sound proof the workshop neighbours and the thiefs dont whant to use plaster boards any good ideas
Thread: scheppach 2600ci
26/09/2009 20:26:26
happy days got the machine setup today very happy with it no problem running on the 13amp fuse lights did not even flicker but when i use to run the metabo 260 the lights all ways flickered i think it might be the thicker cable i am using now that helps and theres less noise then the 260 alot less
Thread: Get Woodworking Live meet-up
24/09/2009 20:49:44
where is it  held i might book cheap  flight never at one of the shows any bargains to be had
Thread: scheppach 2600ci
22/09/2009 20:40:09
its still in the work shop going to put it on a mobile base have not got enough room to to leave it out have to wait till saturday to do it its a tad bit heavy have not even started it yeaht
22/09/2009 20:19:36
thanks i hate getting display modles your back at least twice because they for get to give something the cable i got was 12mm i still haveto wire the plug up never done a 16 amp plug before
22/09/2009 19:54:49
quick question did every body get a knife setting i didn t  they gave me the display one told me the last one had been sold by mistake
20/09/2009 16:30:29
thanks big al i have one of them do you use original blades
20/09/2009 11:49:58
sorry al one more thing i saw TCT blades there not originals its on woodford woodworking machinery site did you ever use blades like this i have a lot of iroko to plane up and the price is not to bad
20/09/2009 11:34:16
thanks al they gave me a plug and some three core never wired one of those plugs up before and christ does that machine way a lot had to cary it though the the house
19/09/2009 20:49:11
need some advice heard some one say they ran there 2600 planner on a 13amp plug and how did they do the plug setup
Thread: Going Down?
31/08/2009 21:32:42
have to say not a bad site just needs abit of life put back into it online tool reviews some plans for projects the new lads can do dont forget this site is not just for the serous amature its for the new lads who just got the bug as well there the people that is needed to
Thread: plannerthicknesser
17/08/2009 22:03:05
thanks big al going with the sheppach nobody seems to know much about the record so ill stick with a brand i know just have to sell my metabo plannerthicknsser first
15/08/2009 21:42:16
has any body got or used the record 12x8 plannerthicknesser
13/08/2009 22:02:00
thanks dennis i have a record exstractor already i have to say there not a bad machine i use it with my metabo plannerthicknesser
13/08/2009 21:00:09
hello lads does any one out there own the record 12x8 i thinks its the 300 planner thicknesser i was thinking of buying one its at the top end of my buget i need something thats going to do good bit of work i know you get a five year guarantee or would i be better of going for the scheppach hms260 i know the difference size wise and i know what i need it for iam just looking for a machine thats going to the work and not have to worry about to much down time there not much of a price difference and is the scheppach a 16 amp supplie
Thread: best spindle moulder
24/07/2009 15:55:39
rob i would like to know what would be the best size power feed its for light trade use and hobby the one on axminster site is a one eight horse power or will i need something bigger
23/07/2009 20:59:45
hello rob or any one else out their will give me some advice on a power feed i got fox moulder looking at the axminster site they have power feed called co matic m3 has anyone got one
Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Latest Forum Posts
Support Our Partners
Wood Workers Workshop
Robert Sorby
Craft Supplies
Transwave 2017
Felder UK April 2016
D B Keighley
Turners Tool Box
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact