By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Jas Evic

Here is a list of all the postings Jas Evic has made in our forums. Click on a thread name to jump to the thread.

Thread: Woodworking Project Basics - What Is Joinery?
25/10/2018 23:46:22

My post was too long, I am continuing below.

One of the more complex to woodworking joints to make is the dovetail joint. However, this joint is very strong because it uses fingers to connect the pieces. This woodworking joint does not require nails or screws but is held together with glue. The fingers of the dovetail joint are cut at angles giving added strength. These are often seen being used in a chest of drawers, where the sides of the drawer connect to the front.

As you can see, there are some joints which can be used in the joinery process. These are only a few of them. Various woodworking projects benefit from using certain types of joints over other types. Using proven woodworking plans will help you determine the best joint to use in your next woodworking project.

If you found my work valuable please consider helping me with some feedback on a VidFlow YouTube video woodworking playlist I am working on. What should I add and what is it missing? I am also working on a video playlist on Wood Carving.

Thank you so much, I appreciate all the help I can get.

Regards,

JE

25/10/2018 23:45:44

If you are a novice woodworker, there are several basic terms you should learn as you undertake your next woodworking project. One word you will come across is "joinery." This term refers to the usage of various types of joints that connect pieces of wood thus making a more complex wood structure such as furniture. Of course, this term not only applies to wood furniture but to just about any structure that uses wood, such as a house.

There are some joints uses in woodworking. Some of these are dovetail, butt, lap and miter joints. These joints vary in purpose, simplicity, flexibility, and level of strength. They also differ in how they fasten the pieces of wood together. Some use nails or screws, dowels; whiles others use glue.

The simplest to build is the butt joint, as it involves only joining two-piece wood together at a right angle. This type of joint is the quickest to employ because of its simplicity. The butt joint is held together with nails or screws. This kind of joint does not require screws or nails as glue and dowels are used instead.

The butt joint is similar to the miter joint. The ends of wood to be attached are cut at forty-five-degree angles, with those ends being placed together. This a weak joint but like the butt joint, it can be made quickly. However, it can be reinforced with a spline. This is a stripe of wood inserted in a matching groove. This type of joint is known as a spline miter joint.

Another joint you might use in your next woodworking project is the lap joint. In this case, the two pieces of wood are joined together by overlapping the two ends. This is a weak joint but can be quickly constructed and used in many types of woodworking projects. These joints have more strength than the simple butt and miter joints and often used in cabinet making.

Thread: Any recommendations on a good starter set of carving burrs for detailed work?
21/10/2018 19:46:56

Thank you for answering! I really want to create some nice playlists that way I can also see the big picture and start going deep dive into more topics. I'll look into it and thank you again for answering, especially on a nice Sunday.

Have a good one!thumbs up

20/10/2018 20:07:02

Sweet, these look cool. Thank you. thumbs up

Nice one with the butterfly holes! What do you think of the WeCheer Flexi-Shaft that is recommended? Worth buying?

20/10/2018 14:23:02

Seems like a good Christmas present. Carving with only chisels from start to finish it’s a pain. gift

Thread: Cabinet project - uneven boards
16/10/2018 12:22:10

I am a hobbyist and I've decided on a cabinet project I have some boards that are not even .... I mean flat.. and I was wondering what's the best way to make them smooth. Any good resource that you have used and got good results?

I don't have any machinery yet.

Thank you for your help!

Magazine Locator

Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker inc Good Woodworking 

Latest Forum Posts
Support Our Partners
Peter Sefton IMPROVE FAST LONG
Wood Workers Workshop
Triton
Felder UK April 2016
Transwave 2017
Chippendale
Tool Post
D&M Tools
Turners Tool Box
Tormek
D B Keighley
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact