By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for David A. Moody

Here is a list of all the postings David A. Moody has made in our forums. Click on a thread name to jump to the thread.

Thread: elm hollow form
18/02/2017 11:02:25

I agree with Sparky, stunning work!

Thread: Coloured Box
05/02/2017 05:53:45

Nicely done, worked out well in the end

Thread: Double Spring Pole Lathe [Part 4]
31/01/2017 01:48:48

thanks, I am too. I'm glad of the opportunity to test it out the way I did, it meant that I was able to adjust my thinking regarding my own personal improvements to the design before going too far. I'm even considering at this point of not worrying about the springpoles themselves and just using the bungee hook straps since they worked so well during the test. It is a departure from my original intention, but I guess the folding upright support is also a major departure from the authenticity anyway, so why not!

Thread: Plant Pot from recycled wood
31/01/2017 01:46:12

Hello Derek, yes, it will eventually rot the wood, but this wood rots fairly slowly, and by the time that it is finally of no use the pine will need to be re-potted into something bigger anyway, so I'm not really worried about that. It's just been built to meet a temporary need, not a permanent one. In the meantime however, my wife and I are both enjoying seeing it, and in the few weeks that's it's been there the pine has certainly improved. I kind of see the pot itself as slow release fertiliser for the tree lol.

Thread: Double Spring Pole Lathe [Part 4]
28/01/2017 09:20:44

A few weeks ago I did some more work on my lathe, but I've only just got around to posting it due to work and study commitments. In this update I've finished the rocker arm mechanism, installed the foot peddle, and started on the headstock.

Read the full article here: **LINK**

Thread: Plant Pot from recycled wood
28/01/2017 09:15:57

I spend an hour or so one afternoon making this plant pot. In the few weeks that have past since then my Norfolk Island Pine has been doing much better, so it must like it!

Read the full article here: **LINK**

Thread: Latest pens
20/01/2017 11:36:14

Beautiful work Derek!

Thread: Nice clock
20/01/2017 11:34:59

Thanks Paul, I was wondering if it was a custom job. I've seen some tutorials on Instructables and other places for recycling old printers and scanners into CNC machines, was wondering if that's what you've done. If anyone else reads this who has built a CNC machine in this way I'd sure love to hear from you. I have three old printers ready waiting!

13/01/2017 02:53:17

You made your own CNC machine, how?

Thread: Marc's carving
08/01/2017 12:49:17

Beautiful

Thread: Surf and Turf
08/01/2017 12:48:05

Very nice, how did you do the coloring?

Thread: Nice clock
08/01/2017 12:47:03

Wow, I've been dreaming of making a clock ever since seeing a basic one in the old Popular Mechanics Encyclopedia set Dad used to have. Would you mind sharing your experiences in making this?

Thread: The Experiment
08/01/2017 12:45:42

Very nice

Thread: Need to replace switch on cutter
06/01/2017 10:35:28

Yes, I do agree with that advice. I am looking for a genuine switch, but just to have a backup plan!

I did by the way make a mistake, it's 7", not 7.5" lol

06/01/2017 05:19:09

img_0013.jpg

06/01/2017 05:18:34

img_0014.jpgI have a Black & Decker 7.5" cutter, but it appears that the switch is busted. I could possible order a replacement, but since it is a simple on and off switch I think it might be easier just to bypass the original, hopefully remove it altogether, and just install a normal power switch into the power cable. My problem is that I don't understand the wiring configuration of this switch. Does anyone know how I might be able to do this?

Thread: Jewellery Cabinet
05/01/2017 13:13:45

I made this as a Christmas gift for my wife, she loves it!

Read about the project here

Thread: Work table upgrade, a success, and a failure!
05/01/2017 05:41:26

I had decided to build a Christmas present for my wife, a jewellery cabinet, but I needed something better than my existing trestle table, so I upgraded it. The upgrade was definitely a success, but for some reasons it was also a failure.

Click here to read my blog article.

Thread: 2017
03/01/2017 15:27:54

And to you too

Thread: Just in time
21/12/2016 01:45:53

Beautiful!

Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Support Our Partners
Peter Sefton IMPROVE FAST LONG
Craft Supplies
Marriott & Co
Felder UK April 2016
Transwave 2017
Triton
Wood Workers Workshop
Robert Sorby
Chippendale
Tormek
Turners Tool Box
D B Keighley
D&M Tools
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact