By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Bernard Griffin

Here is a list of all the postings Bernard Griffin has made in our forums. Click on a thread name to jump to the thread.

Thread: Kity 613 Bandsaw Spares
31/03/2014 23:21:03

Sorry, all spares are gone.


31/03/2014 23:19:40

Sorry, all spares are gone.


Thread: Bandsaw Guides, Discs V Rollers
08/12/2013 23:44:08

Hello Richard,

I had a look at your photos. Nice work, and a lot of gear in the workshop you have there! Did you turn Oddjob's hat for him ? Must be lethal if its Ironwood !


08/12/2013 23:11:54

Thanks Richard and Doug.

Roller bearing guides it is. That rules out the Record Power machines .

I make furniture and curvy chairs in the style of Sam Maloof, so I need a bandsaw with a 1 - 1 1/2 HP motor that will run off a 13 Amp domestic supply. Running a 16 Amp supply into my garage would be an expensive nightmare because of the geography of my house, So that rules out the Startrite saws.

My bandsaw of choice would be the Jet JWBS-14DXPRO which must be one of the most successful and popular saws sold in the USA. Its not available in the UK because it has not been assessed for CE compliance and so cannot be legally sold in the EU. ( If thats not a good reason for getting the hell out of the EU, then i don't know what is !!! ) Evidently Jet are currently working on a new range of bandsaws for the EU market and they hope to have them available late 2014 or early 2015. So thats Sods Law again, as I am 85, and couple of my projects are somewhat pressing !

I am informed by Axminster that their SBW3501B Trade bandsaw is made by the same people as the Jet 14DXPRO , but it doesn't have enough power with only 0.737 HP, and perhaps its a tad light at 84 Kg.when a fair proportion of the weight is in the sheet metal base.

I have taken a look at the Jet JWBS-14Q which is again only 0.737 HP, and the fence carrier block is bedded onto the fence riel with grotty glued - on plastic anti-friction pads which fell off at the demo. Perhaps there are two separate Jet manufacturers, one for the Americans, and one for the rest of us mortals ?

There must be a bandsaw for me out here somewhere,so if anyone can point me in the right direction i will be eternally grateful.


Edited By Steven on 09/12/2013 17:49:41

06/12/2013 19:00:13

I am about to purchase a new Bandsaw. Are there any Engineers out there who can advise on bandsaw guides. Two types of guides appear on most mid- range bandsaws i.e.flat discs on sides and back of blade as on Record Power BS300E, or roller bearings to sides and back of blade as on the Axminster Trade Bandsaws.

My only experience is with an old Kity 613, which had flat discs above the table and wood blocks below the table. The discs revolved occasionally in use and quite often sparked under load, indicating too much friction ,even when finely adjusted clear of the blade.

Logic points me towards roller bearings. What say you ?


Thread: Kity 613 Bandsaw Spares
30/09/2013 03:34:59

I recently damaged my Kity 613 bandsaw . As spares are no longer available for this machine, I can't repair it.

I have salvaged all usable parts from the steel frame. I have every part with the exception of the damaged peessed steel quadrent plates in the table tilt mechanism. I also have the manual for the 613 to identify the part numbers.

If anyone needs free replacement parts for a Ktty 613 just email me at


Magazine Locator

Want the latest issue of The Woodworker & Good Woodworking? Use our magazine locator links to find your nearest stockist!

Find The Woodworker & Good Woodworking 

Support Our Partners
Craft Supplies
Wood Workers Workshop
Marriott & Co
Transwave 2017
Felder UK April 2016
Robert Sorby
Turners Tool Box
D&M Tools
D B Keighley
Subscription Offers

Subscribe to<br />    The Woodworker Magazine and receive a FREE gift

Contact Us

We're always happy to hear from you, so feel free to get in touch!

Click here to find who to contact