Snappy Micro Bit Holders Snappy Micro Bit Holders

The latest addition to the ever-popular Trend Snappy range sees the introduction of two new screwdriver bit holders, available in two lengths: a standard 66mm, and an extra-long 150mm option for applying fixings in deeper recesses or hard-to-reach areas.

The Micro Bit Holders are designed to take standard 25mm hex shank bits and have sleeve style spring-loaded chucks that retain the bits securely until the sleeve is pulled back to release them, thus eliminating any problems of the bits pulling out once the screw or fixing has been driven; a major advantage over standard bit holders.

At only 10.8mm diameter, these new holders are especially suited for gaining access into tighter or narrower spots, and with the quick chuck hex shank they are designed to be used in both drill drivers and impact drivers and have a torque rating of 50Nm along with 3,900-4,s000 Gauss magnets to hold the screws on the bit.

Made from chrome vanadium and stainless steel, the new Trend Snappy Micro Bit Holders are durable, affordable and are set to become an ideal and essential part of your everyday kit. The SNAP/BH/M is priced at £9.54 and the SNAP/BH/M/A at £11.94 (inc VAT). They are available from all Trend Routing Centres and stockists across the UK.

For a copy of the Trend Catalogue, or to request further information and details of your nearest Trend Dealer, please call 01923 249911 or..

To find out more, visit Trend’s website