brimarc logo

 

Look out for the new Jet DC-850 Extractor

 

jet dc850 extractor_ chip extractor

 

We are all aware of just how important dust extraction is in the workshop. The new Jet DC-850 Extractor is neat, compact and unobtrusive. It is perfect for use with a lathe or any bench top machine and can be stored away under the bench when not in use.

We are all aware of just how important dust extraction is in the workshop. The new Jet DC-850 Extractor is neat, compact and unobtrusive. It is perfect for use with a lathe or any bench top machine and can be stored away under the bench when not in use.

This chip extractor can be used in small home workshops for common wood machining tasks where a higher airflow than that provided by a vacuum extractor is required. A quiet running induction motor provides plenty of power to extract from many small workshop machines and runs at a volume which will not annoy the neighbours. The inlet diameter is 100mm (4"), the outlet into the bag is 125mm (5") and the airflow is sufficient to handle the majority of waste likely to be produced by the home workshop. The base is fitted with castors and a grab handle for easy mobility.

One point to emphasize is that this is a chippings extractor and it should not be expected to collect fine dust. As with all the high volume, low pressure airflow machines, the inlet should not be restricted to below 75mm diameter and the bag should be emptied regularly. A hose can be purchased separately.

Price: £169.96 inc vat valid until 31st December 2014

Website: Brimarc.com