...new from Trend
Trend have just launched two new 4pc Grabit Sets.
The bits are used in reverse mode and at slow speed in a drill using the burnishing end first to ream a tapered hole into the damaged fixing before flipping the bit and running the threaded end into the hole to grab the fixing and remove it. The sets are manufactured from High Speed Steel (HSS) for durability and performance and can be used on mild steel and alloy fixings. They are supplied in handy storage cases and can be used on a number of screw driver types including Phillips®, Pozi®, slotted, hex, Torx®, square and Tri-wing®.
The GRAB/SE2/SET, 4pc set can remove screw sizes from Nos. 4-24 (3mm-9.5mm) and bolts from M4-M12.
The Micro Grabit set, GRAB/ME1/SET, 4pc set is ideal for smaller fixings including delicate screws from Nos. 5-14 (3mm to 6mm) and bolts from M3 to M6, the set is perfect for use in woodworking, model engineering, electronics and precision instrument applications.
Both sets are priced at £25.95 excluding VAT and are available from all Trend Routing Centres and Stockists across the UK.
For a copy of the Trend Catalogue, or to request further information and details of your nearest Trend Dealer, please call 01923 249911 or..
To find out more, visit Trend’s website
Want the latest issue of The Woodworker incorporating Good Woodworking? Use our magazine locator links to find your nearest stockist!
We're always happy to hear from you, so feel free to get in touch!